Polymer Mechanics Lab
This newly renovated lab contains the necessary facilities and equipment for polymer synthesis and thermomechanical characterization. The lab has a 4ft chemical fume hood, appropriate storage for chemicals and flammables, a sink, and two rows of impermeable counters.
A full chemical inventory, lab safety and training resources can be found in the All Things Experiments Lab Wiki. If you are interested in using the equipment, please contact the PI at [email protected]. Hourly fees will be applied to companies. It is strongly recommended that you read the product specifications for the equipment to determine if it will meet your needs.
- TA Instruments Q20 ,Dynamic Scanning Calorimetry with modulated DSC capability, RCS40 cooling system -40◦C-400◦C.
- TA Instruments Q800, Dynamic mechanical analyzer with liquid nitrogen cooling and asso- ciated computer and software. Specs: -150◦C – 600◦C, frequency range 0.01-200 Hz, heating rate 0.1-20.0◦C/min, cooling rate 0.1-10◦C/min, force range 10−4 − 18.0 N and resolution 10−5 N, displacement resolution 1.0 nm, film tension grips, single and double cantilever beam grips, and compression platens.
- MTS Insight 5 electromechanical test system and Testworks software and computer. Specs: 5 kN force capacity, test speed 0.001 mm/min-500 mm/min, position accuracy 0.01 mm and resolution 0.001 mm. MTS 5KN and 500 N load cells. MTS 5 kN Bionix self-tightening tensile grips rated for 100◦C, and 2.0 inch compression platens.
- Lab-Temp Thermcraft temperature and controller, temperature range (-185◦C-425◦C). The Thermcraft temperature chamber attaches to the MTS Insight 5 for thermomechanical char- acterization.
- Correlated Solutions VIC2D and VIC3D system with Pt. Grey Research GRAS-20S4M/C 2.0 MP camera.
- FLIR A6701sc Short wave infrared camera with thermographic calibration for -20◦C-350◦C, 50 mm lens 3.0-5.0μm, and associated FLIR ResearchIR Max 4 thermal analysis software.
- Echotherm IN30 incubator, range 20◦C-70◦C, 1◦C precision.
- UVP CL-1000 ultraviolet cross linker 365 nm wave length
- Mettler Toledo precision balance, 0.001 g accuracy
- Digital Vortex-Genie 2, 500 to 3000 rpm
Soft Tissues Mechanics Lab
Office Space: Latrobe 216A functions as an office with open seating for 6 students and postdocs. The office space is bright, with 9 large windows that overlook the Latrobe courtyard. Students who prefer to work in cubicles can also sit in the ME Solids Student Offices in Latrobe 230 and 231.
Biosafety Lab: The Biosafety lab is a separate, fully enclosed room in Latrobe 216A. The lab has independent temperature control, light control, air handling system, a 4ft biosafety cabinet, and a wet lab space with sink, eye wash, and an impermeable specimen preparation surface.
A full chemical inventory, lab safety and training resources can be found in the All Things Experiments Lab Wiki.
- MTS Insight 5 with 1kN load cell, custom built syringe fixture.
- Custom built inflation system with light fixtures, air brush and other equipment for speckling
- 3 Pt. Grey Research GRAS-20S4M/C 2.0 MP camera.
- Optical table
- Correlated Solutions VIC2D, VIC3D, VicSnap
- Fast Iterative Digital Volume Correlation software
- Huygens Essential Deconvolution Software
Nguyen Lab: The lab houses a shared workstation system, which includes a dual quad-core MacPro, with 8 processors, 32GB RAM a 2 TB internal hard drive, and a 16 TB Raid 1 backup data storage system. The workstation is equipped with Tahoe, an open source platform for development of finite element models and method (the PI Nguyen is a principal developer). Also installed on the workstation are Cubit, a mesh generator, Ensight, a powerful visualization program, and a custom optimization program. The MacPro are mainly used for larger computations and for Masters and undergraduate researchers. PhD students have work mainly on their high-end laptops.
The full list of software tools and installation directions for Tahoe and other custom codes are found on the Computing and Software Lab Wiki. New lab members are strongly urged to read the wiki.
Maryland Advanced Research Computing Center (MARCC): is a shared computing facility that contains 19,104 cores located on the Bayview Campus of Johns Hopkins University and funded by a State of Maryland grant to Johns Hopkins University. MARCC is jointly managed by Johns Hopkins University and the University of Maryland College Park. The majority of the simulations run by students in the Nguyen Lab are either on HHPC and MARCC.